Global Piezoelectric Crystal Market Insights, Forecast to 2025
Piezoelectric crystals are one of many small scale energy sources. Whenever piezoelectric crystals are mechanically deformed or subject to vibration they generate a small voltage, commonly know as piezoelectricity. This form of renewable energy is not ideally suited to an industrial situation.
The ability of certain crystals to generate Piezoelectricity in response to applied mechanical stress is reversible in that piezoelectric crystals, when subjected to an externally applied voltage, can change shape by a small amount. This deformation, though only nanometers, has useful applications such as the production and detection of sound.
Probably the best-known use of piezoelectric crystals is in the electric cigarette lighter. Here, pressing the button causes a spring-loaded hammer to hit a piezoelectric crystal, the high voltage produced by this ignites the gas as the current jumps over a small spark gap. This technique also applies to some gas lighters used on gas grills or stoves.
Another common usage of a piezoelectric crystal energy source is that of creating a small motor; such as that used in a reflex camera to operate the auto focus system. These motors operate by vibration. The two surfaces are forced to vibrate at a phase shift of 90 degrees by a sine wave that has been generated at the motors resonant frequency. This forces a frictional force where the two surfaces meet and as one of the surfaces is fixed the other is forced to move.
The Piezoelectric Crystal market was valued at xx Million US$ in 2018 and is projected to reach xx Million US$ by 2025, at a CAGR of xx% during the forecast period. In this study, 2018 has been considered as the base year and 2019 to 2025 as the forecast period to estimate the market size for Piezoelectric Crystal.
This report presents the worldwide Piezoelectric Crystal market size (value, production and consumption), splits the breakdown (data status 2014-2019 and forecast to 2025), by manufacturers, region, type and application.
This study also analyzes the market status, market share, growth rate, future trends, market drivers, opportunities and challenges, risks and entry barriers, sales channels, distributors and Porter's Five Forces Analysis.
The following manufacturers are covered in this report:
Harri
MURATA
Johnson Matthey
Arkema
Meggitt Sensing
KYOCERA
Piezo Kinetics
Morgan Advanced Materials
CeramTec
Solvay
Physik Instrumente (PI)
Sparkler Ceramics
Konghong Corporation
TRS
APC International
Piezoelectric Crystal Breakdown Data by Type
Crystal (Alpha-Quartz)
Sphalerite
Boron Borate
Other
Piezoelectric Crystal Breakdown Data by Application
TCXO(Temperature Compensate X'tal (crystal) Oscillator)
Voltage Controlled X'tal(crystal) Oscillator
Oven Controlled Crystal Oscillator
Other
Piezoelectric Crystal Production by Region
United States
Europe
China
Japan
South Korea
Other Regions
Piezoelectric Crystal Consumption by Region
North America
United States
Canada
Mexico
Asia-Pacific
China
India
Japan
South Korea
Australia
Indonesia
Malaysia
Philippines
Thailand
Vietnam
Europe
Germany
France
UK
Italy
Russia
Rest of Europe
Central & South America
Brazil
Rest of South America
Middle East & Africa
GCC Countries
Turkey
Egypt
South Africa
Rest of Middle East & Africa
The study objectives are:
To analyze and research the global Piezoelectric Crystal status and future forecast，involving, production, revenue, consumption, historical and forecast.
To present the key Piezoelectric Crystal manufacturers, production, revenue, market share, and recent development.
To split the breakdown data by regions, type, manufacturers and applications.
To analyze the global and key regions market potential and advantage, opportunity and challenge, restraints and risks.
To identify significant trends, drivers, influence factors in global and regions.
To analyze competitive developments such as expansions, agreements, new product launches, and acquisitions in the market.
In this study, the years considered to estimate the market size of Piezoelectric Crystal :
History Year: 2014 - 2018
Base Year: 2018
Estimated Year: 2019
Forecast Year: 2019 - 2025
This report includes the estimation of market size for value (million USD) and volume (MT). Both top-down and bottom-up approaches have been used to estimate and validate the market size of Piezoelectric Crystal market, to estimate the size of various other dependent submarkets in the overall market. Key players in the market have been identified through secondary research, and their market shares have been determined through primary and secondary research. All percentage shares, splits, and breakdowns have been determined using secondary sources and verified primary sources.
For the data information by region, company, type and application, 2018 is considered as the base year. Whenever data information was unavailable for the base year, the prior year has been considered.
The ability of certain crystals to generate Piezoelectricity in response to applied mechanical stress is reversible in that piezoelectric crystals, when subjected to an externally applied voltage, can change shape by a small amount. This deformation, though only nanometers, has useful applications such as the production and detection of sound.
Probably the best-known use of piezoelectric crystals is in the electric cigarette lighter. Here, pressing the button causes a spring-loaded hammer to hit a piezoelectric crystal, the high voltage produced by this ignites the gas as the current jumps over a small spark gap. This technique also applies to some gas lighters used on gas grills or stoves.
Another common usage of a piezoelectric crystal energy source is that of creating a small motor; such as that used in a reflex camera to operate the auto focus system. These motors operate by vibration. The two surfaces are forced to vibrate at a phase shift of 90 degrees by a sine wave that has been generated at the motors resonant frequency. This forces a frictional force where the two surfaces meet and as one of the surfaces is fixed the other is forced to move.
The Piezoelectric Crystal market was valued at xx Million US$ in 2018 and is projected to reach xx Million US$ by 2025, at a CAGR of xx% during the forecast period. In this study, 2018 has been considered as the base year and 2019 to 2025 as the forecast period to estimate the market size for Piezoelectric Crystal.
This report presents the worldwide Piezoelectric Crystal market size (value, production and consumption), splits the breakdown (data status 2014-2019 and forecast to 2025), by manufacturers, region, type and application.
This study also analyzes the market status, market share, growth rate, future trends, market drivers, opportunities and challenges, risks and entry barriers, sales channels, distributors and Porter's Five Forces Analysis.
The following manufacturers are covered in this report:
Harri
MURATA
Johnson Matthey
Arkema
Meggitt Sensing
KYOCERA
Piezo Kinetics
Morgan Advanced Materials
CeramTec
Solvay
Physik Instrumente (PI)
Sparkler Ceramics
Konghong Corporation
TRS
APC International
Piezoelectric Crystal Breakdown Data by Type
Crystal (Alpha-Quartz)
Sphalerite
Boron Borate
Other
Piezoelectric Crystal Breakdown Data by Application
TCXO(Temperature Compensate X'tal (crystal) Oscillator)
Voltage Controlled X'tal(crystal) Oscillator
Oven Controlled Crystal Oscillator
Other
Piezoelectric Crystal Production by Region
United States
Europe
China
Japan
South Korea
Other Regions
Piezoelectric Crystal Consumption by Region
North America
United States
Canada
Mexico
Asia-Pacific
China
India
Japan
South Korea
Australia
Indonesia
Malaysia
Philippines
Thailand
Vietnam
Europe
Germany
France
UK
Italy
Russia
Rest of Europe
Central & South America
Brazil
Rest of South America
Middle East & Africa
GCC Countries
Turkey
Egypt
South Africa
Rest of Middle East & Africa
The study objectives are:
To analyze and research the global Piezoelectric Crystal status and future forecast，involving, production, revenue, consumption, historical and forecast.
To present the key Piezoelectric Crystal manufacturers, production, revenue, market share, and recent development.
To split the breakdown data by regions, type, manufacturers and applications.
To analyze the global and key regions market potential and advantage, opportunity and challenge, restraints and risks.
To identify significant trends, drivers, influence factors in global and regions.
To analyze competitive developments such as expansions, agreements, new product launches, and acquisitions in the market.
In this study, the years considered to estimate the market size of Piezoelectric Crystal :
History Year: 2014 - 2018
Base Year: 2018
Estimated Year: 2019
Forecast Year: 2019 - 2025
This report includes the estimation of market size for value (million USD) and volume (MT). Both top-down and bottom-up approaches have been used to estimate and validate the market size of Piezoelectric Crystal market, to estimate the size of various other dependent submarkets in the overall market. Key players in the market have been identified through secondary research, and their market shares have been determined through primary and secondary research. All percentage shares, splits, and breakdowns have been determined using secondary sources and verified primary sources.
For the data information by region, company, type and application, 2018 is considered as the base year. Whenever data information was unavailable for the base year, the prior year has been considered.
Frequently Asked Questions
This market study covers the global and regional market with an in-depth analysis of the overall growth prospects in the market. Furthermore, it sheds light on the comprehensive competitive landscape of the global market. The report further offers a dashboard overview of leading companies encompassing their successful marketing strategies, market contribution, recent developments in both historic and present contexts.
- By product type
- By End User/Applications
- By Technology
- By Region
The report provides a detailed evaluation of the market by highlighting information on different aspects which include drivers, restraints, opportunities, and threats. This information can help stakeholders to make appropriate decisions before investing.
Please Select a Format
