Global Fluorine Anhydride Polyimide Market Insights, Forecast to 2025

Fluorine Anhydride Polyimide is obtained by reacting hexafluorodianhydride (6FDA) with an aromatic diamine. Hexafluoro dianhydride contains a perfluoroisopropyl group without a hydrogen atom, and thus has high heat resistance and resistance to thermal oxidation. Such polyimides are amorphous and do not crosslink, which contributes to the polymer's meltability and molecular chain flexibility. Typical products such as DuPont's NR-150 series materials. The mechanical strength at room temperature and the mechanical strength after long-term aging in air above 300 ° C are good. The dielectric constant is 2.9 at room temperature, and the loss factor is about 1×10-3- 2×10-3. Even at temperatures as high as 18 ° C, these data do not change much. The material has good hydrolysis resistance and is easy to process, and can be used for preparing laminates, coatings and adhesives. The fluoro anhydride type polyimide material has excellent properties, but the monomer cost of the material is high, which hinders the large-scale application of the material to some extent.
The Fluorine Anhydride Polyimide market is in an oligopolistic situation. Japan is now the key producers of Fluorine Anhydride Polyimide in Global market and Sumitomo Chemical is the main producer in Japan; it took up more than 95% the global Optically Transparent Polyimide Films market in 2018. When SKC and Kolon's CPI project is mass produced, South Korea will also become the main producer. The CPI market belongs to the high-end electronic technology market, and Japan is the largest supplier and is in a monopoly position. Therefore, the Fluorine Anhydride Polyimide product sales model is basically direct sales. CPI films are in short supply. Most countries rely on imports, and Japan is the largest exporter. With the rapid development of science and technology, CPI film technology is becoming more and more mature, and other countries are likely to achieve self-sufficiency in domestic production.
Global Fluorine Anhydride Polyimide market size will increase to 363.4 Million US$ by 2025, from 28 Million US$ in 2018, at a CAGR of 47.4% during the forecast period. In this study, 2018 has been considered as the base year and 2019 to 2025 as the forecast period to estimate the market size for Fluorine Anhydride Polyimide.

This report researches the worldwide Fluorine Anhydride Polyimide market size (value, capacity, production and consumption) in key regions like China, Japan and South korea.
This study categorizes the global Fluorine Anhydride Polyimide breakdown data by manufacturers, region, type and application, also analyzes the market status, market share, growth rate, future trends, market drivers, opportunities and challenges, risks and entry barriers, sales channels, distributors and Porter's Five Forces Analysis.

The following manufacturers are covered in this report:
Sumitomo Chemical
Kolon
SKC
Kaneka
JSR
HiPolyking
...

Fluorine Anhydride Polyimide Breakdown Data by Type
Yellow Fluorine Polyimide
Colourless Fluorine Polyimide

In 2018, Colourless Fluorine Polyimide accounted for a major share of 99% in the global Fluorine Anhydride Polyimide market. And this product segment is poised to reach a volume of 2664902 Kg by 2025 from 226872 Kg in 2019.

Fluorine Anhydride Polyimide Breakdown Data by Application
Foldable Smartphone
Curved TV
Others

In Fluorine Anhydride Polyimide market, Foldable Smartphone segment holds an important share in terms of application, and it is expected to reach a volume of 2659109 (Kg) by 2025, at a CAGR of 51.14% during 2019 and 2025. It means that Fluorine Anhydride Polyimide will be promising in the Foldable Smartphone field in the next couple of years.

Fluorine Anhydride Polyimide Production Breakdown Data by Region
China
Japan
South korea

Fluorine Anhydride Polyimide Consumption Breakdown Data by Region
North America
United States
Canada
Mexico
Europe
Germany
France
UK
Italy
Russia
Asia-Pacific
China
Japan
South Korea
India
Australia
Indonesia
Thailand
Malaysia
Philippines
Vietnam
Central & South America
Brazil
Middle East & Africa
Turkey
GCC Countries
Egypt
South Africa

The study objectives are:
To analyze and research the global Fluorine Anhydride Polyimide capacity, production, value, consumption, status and forecast;
To focus on the key Fluorine Anhydride Polyimide manufacturers and study the capacity, production, value, market share and development plans in next few years.
To focuses on the global key manufacturers, to define, describe and analyze the market competition landscape, SWOT analysis.
To define, describe and forecast the market by type, application and region.
To analyze the global and key regions market potential and advantage, opportunity and challenge, restraints and risks.
To identify significant trends and factors driving or inhibiting the market growth.
To analyze the opportunities in the market for stakeholders by identifying the high growth segments.
To strategically analyze each submarket with respect to individual growth trend and their contribution to the market.
To analyze competitive developments such as expansions, agreements, new product launches, and acquisitions in the market.
To strategically profile the key players and comprehensively analyze their growth strategies.

In this study, the years considered to estimate the market size of Fluorine Anhydride Polyimide :
History Year: 2014-2018
Base Year: 2018
Estimated Year: 2019
Forecast Year 2019 to 2025
For the data information by region, company, type and application, 2018 is considered as the base year. Whenever data information was unavailable for the base year, the prior year has been considered.

Frequently Asked Questions